Battery Power
2 4
Accurately Displaying Battery Capacity
The battery pack has a function for measuring, storing, and learning about battery capacity. Using this function properly to accurately display remaining battery capacity requires that the battery pack be fully charged (charged to 100%), then fully discharged, and then fully charged again.
Use the procedure presented below to fully charge the battery pack, then discharge it, then charge it again. This procedure should be performed once after you purchase the computer. As you use the battery pack over a long period of time, the remaining capacity display may become inaccurate due to aging of the battery pack and other factors. The procedure described below should be repeated.
1
2
Attach the battery pack, then connect the AC adapter
Remove all peripherals (except for the battery pack and AC adapter).
Once the battery indicator turns green, use the Battery Capacity re- fresh utility to fully discharge the battery pack
1Choose
2Type the following after the
c:\windows\command\battref /g Enter
3 At the confirmation message, press Y .
The battery indicator blinks orange, the battery pack will be discharged fully and the
computer will power off automatically.
CAUTION
When the above operation is performed, do not turn the computer off.
Doing so will make it impossible to measure the battery capacity.
N O T E
When the Battery Capacity refresh utility starts, it will take approximately 2.5 hours until the computer powers off automatically.
3 Charge the battery pack until the battery indicator turns green (full charge)
(Charging commences automatically.)
