Oki 3100e manual LPR installation and uninstall, Printer driver setup, Installation

Network] tag. If they are not found, add them in the following procedure:

(a)Click on [Add...] in the [Set Network] tag and open [Add network configuration file(s)].

(b)Select [Protocol] in the [Network configuration file to be installed:], then click on [Add...] and open [Select network protocol] window.

(c)Select [Microsoft] in the [Manufacturers], then [TCP/IP] in the [Network protocols:] and click on [OK].

(d)Make sure that TCP/IP has been added to [Current network configuration] of [Set Network] tag.

3.Select TCP/IP from the [Current network configuration:] list, open [Properties] and set the following items:

(a)IP Address

(b)Subnet mask

(c)Gateway

(d)DNS

	English
Note:	If you do not know the values to set, consult
	the network administrator.

4.Restart the computer after completing the setting of TCP/IP.

Printer driver setup

1.Double-click on [Printers], then double-click on [Add Printer].

2.[Add Printer Wizard] is displayed. Insert the printer driver CD-ROM into the CD drive.

3.Follow the on-screen instructions and install the printer driver selecting the printer as default printer and local printer.

LPR installation and uninstall

Installation

1.Insert the software CD-ROM into the CD-ROM drive.

2.Click on [Start] - [Run].

3.Type D:\OKILPR\SETUP (where D:\ is the drive letter of your CD-ROM drive).

4.Follow the on-screen installation instructions.

Chapter 5 - Utilities Installation 69