2.Change the settings. OkiPage>set protocol [RET]
<<Protocol setting>>
<Select Protocol>
TCP/IP=1; NetWare=2 ; E therTalk=3 NetBEUI=4; SNMP Trap=5
EXIT=0 : 2 [RET]
Will you use NetBEUI ? (y/n) : y [RET]
Enter “n” if you will not use NetBEUI.
Computer
W o r k g r o u p | n a m e ( 1 - 1 5 c h a r ) | : |
OKIDATA04106C [RET] |
|
Are you
OkiPage> logout (or exit, quit) [RET]
Enter an appropriate command, without logging out, if you want to set other protocols.
Setting SNMP environment
Display/set the SNMP environment.
Display | Command to use: | show protocol or |
shpro |
|
|
| Target account: | General users and |
|
| administrator user |
Set | Command to use: | set protocol or sepro |
| Target account: | Administrator user |
The SNMP environment has the following items to be set:
System Contact: Set the contact information of the printer.
System Name: Set the name information of the printer.
System Location: Set the location information of the printer.
Trap Community: Set the Trap Community of the printer.
Trap Destination: Set the Trap Destination address of the printer.
Trap Usage: Set the Trap enable or disable.
Trap events: Specify the events to send Trap.
Setting procedure
Here, the setting procedure is explained using an example, using the setting values shown below:
Item | Setting value |
System Contact | www.okieurope.com |
System Name | OKIPAGE 14i |
System Location | conference room |
Trap Community | public |
Trap Destination | 192.168.0.100 |
| |
Trap events | (ALL) |
52 | OkiLAN 3100e Network Card |