Has network excessive traffic or is there an abnormality?
NO |
Find the source of the problem and bring the |
Are IP address and subnet mask set correctly for printer and host?
NO
YES | network back to a normal state. |
Refer to Common Troubleshooting above
END
YES
Set to Auto or Ether 2
Cannot refer to printer settings or change them with Telnet.
Can log in with Telnet. User name and password unnecessary. Fo both, press Enter key.
NO
YES
Does login prompt user to input USER name displayed?
NO
YES
Is operation panel menu frame type set to Auto
Ether 2?
NO
When router exists between host and printer, is router setting correct?
| NO | |
YES |
| Set router correctly or access |
| ||
| printer from a host which | |
|
| does not go through router. |
|
|
|
When router exists between host and printer, is default gateway setting correct?
| NO | |
YES |
| Set default gateway correctly |
| ||
| for both printer and host. | |
|
|
|
Less than two Telnets are connected
YES
Set to Auto or Ether 2
simultaneously.
NO
YES
Close a Telenet session
80 | OkiLAN 320e Network Card |
