Printer settings
For the basic use of the printer’s operator panel, please refer to the user’s guide for the printer.
Please wait for a minimum of 30 seconds before turning the power off to the printer. It will take about 30 seconds for the printer to save a menu change after you exit the menu.
If you wish to cancel the menu change, you can exit the menu mode by pressing the
We recommend that you confirm the contents with menu print after you make a change in the menu.
Note: | You can only carry out a network setting of |
| th e printer when the p rin ter is NOT |
| receiving any print data. |
Network enable/disable
In order to connect this network card to network and use it, Network must be set to ENABLE on the printer’s operator panel. The default setting for NETWORK in the printer menu is ENABLE* (* indicates that value is set).
1.Confirm that the printer is in the idle state from the LCD panel and the indicator.
Note: | Do not set NETWORK to DISABLE* whilst |
| print data is being received by the printer. |
2.Press
3.Press ENTER button. PARALL is displayed. Press MENU1 button, to display NETWORK.
4.When you see that the bottom column of the LCD is ENABLE*, press
5.When you see that the bottom column of the LCD is DISABLE*, press left arrow button or right arrow button until ENABLE is displayed in the LCD bottom column. Then press ENTER button to have the ENABLE* displayed. Then press ON- LINE button to end the menu setting.
6.If you do not wish to receive print data from the network, set NETWORK to DISABLE* in the above procedure.
58 | OkiLAN 3100e Network Card |