SIIG 04-0265F specifications Windows XP /Server 2003 64-bit, For New Windows XP/2003 Installation

4.Click Finish and restart Windows to complete the installation.

Windows XP /Server 2003 (64-bit)

For New Windows XP/2003 Installation

A new installation of Windows XP 64-bit/Server 2003 64-bit requires a floppy disk for the driver installation. To make this floppy disk, copy the contents of the 64bit folder, found on the driver CD, onto a blank floppy disk then follow the directions below.

1.Install the board and follow Microsoft procedures to install Windows accordingly.

2.Restart your system when prompted by Windows installation.

3.At the Windows Setup screen, press F6 to install the driver.

4.Insert the floppy disk you made above. Press S then press Enter.

5.Select Silicon Image SiI 3512... that matches your system processor, then press Enter.

6.Press Enter to continue and follow the on-screen instructions to complete the installation.

For Existing Windows XP/2003 Installation

1.Install the board and boot up Windows.

2.At the Found New Hardware Wizard, select No, not at this time, then click Next.

3.Insert the driver CD, select Install the software automatically (Recommended), and click Next.

4.Click Finish and restart Windows to complete the installation.

10