SIIG 04-0265F specifications Windows Server 2008 64-bit, Existing Windows 2008 Installation

5.Select Silicon Image Sil 3512 SATALink Controller..., then click OK

6.Follow on-screen instructions to complete Windows Server 2008 installation.

Existing Windows 2008 Installation

1.Install the board and boot up Windows.

2.At the Found New Hardware Wizard, select Locate and install driver software (Recommended), then click Don't search online.

3.Insert the driver CD. The driver will install automatically.

4.Click Close.

5.Remove the driver CD and restart your Windows to complete the installation.

Windows Server 2008 (64-bit)

New Windows 2008 Installation

1.Install the board and follow Microsoft procedures to install Windows accordingly.

2.At Where do you want to install Windows?, click Load Driver.

3.Insert driver CD, then click Browse.

4.Double click CD Drive (D:). (change D: to match your CD-ROM drive letter)

5.Double click 64bit folder, highlight AMD64 (for 64- bit extended processors) or IA64 (for 64-bit Intel Itanium processors), then click Ok.

6.Select Silicon Image Sil 3512 SATALink Controller..., then click Next.

7.Follow on-screen instructions to complete Windows Server 2008 installation.

13