SIIG 04-0265F specifications Windows ME, Select Search for a better driver..., then click Next

6.Select Search for a better driver..., then click Next.

7.Check Specify a location, uncheck the other boxes, then click Next.

8.Click Next, then click Finish.

9.Remove the driver CD and restart Windows to complete the installation.

For Existing Windows 98SE Installation

1.Install the board and boot up Windows.

2.At the Add New Hardware Wizard, click Next.

3.Select Search for the best driver for your device and click Next.

4.Insert the driver CD, check Specify a location, uncheck the other boxes, type D:\98SE, then click Next. (Change D: to match the drive letter of your CD-ROM)

5.Click Next, then Finish.

6.Remove the driver CD and restart Windows to complete the installation.

Windows ME

For New Windows ME Installation

1.Install the board and follow Microsoft procedures to install Windows ME accordingly.

2.Once Windows has been installed, right click My Computer, then click Properties. Select Device Manager tab.

3.Double click PCI Mass Storage Controller listed under Other Devices.

4.Select Driver tab, then click Update Driver button.

5.Insert the driver CD, select Specify the location of the driver (Advanced), then click Next.

5