6.Charge the Instant Power™ as soon as possible after using the USB port.
5.4Using the Air Compressor
Risk of explosion.
Read the instructions of the product being inflated before using the compressor. Avoid over inflation; do not exceed the manufacturer’s recommended pressures. Do not leave the air compressor unattended during use.
1.Ensure the battery clips are securely on the storage holders.
2.Remove the air compressor hose from the storage compartment in the back of the Instant Power™. Install adapters as necessary.
3.Attach the air compressor hose to the product or accessory to be inflated by flipping down the lever.
4.Place the Compressor Switch in the ON position and inflate the product.
5.When the product is inflated to the proper air pressure (using the air compressor gauge), place the Compressor Switch in the OFF position and remove the hose.
6.Do not run for more than 10 minutes maximum at a time. Allow the Instant Power™ to cool down for 10 minutes before using again.
NOTE: To prevent overheating, the compressor has
NOTE: The air compressor is rated for 150 PSI.
Estimated Time for Inflating
Vehicle Tires 13” to 16” | 3 to 16 minutes |
Bike Tire | 30 to 40 seconds |
Sports Balls | 5 to 30 seconds |
These times are approximate, use the air compressor gauge to ensure the proper pressure has been reached. Do not over inflate.
6.Storage
IMPORTANT:
•CHARGE IMMEDIATELY AFTER PURCHASE
•KEEP FULLY CHARGED
Charge immediately after purchase, after each use and every 30 days to keep the instant power™ internal battery fully charged.
All batteries are affected by temperature. The ideal storage temperature is at 70 degrees Fahrenheit. The internal battery will gradually
The clips on the Instant Power™ are live and will produce arcing or sparking if they come in contact with each other. To prevent accidental arcing, always keep the clips on the storage holders when not using it to jump start a vehicle.
• 6 •