Tekram Technology DC-820B manual SCO Unix, Driver installation, Driver removal

EISA Fast SCSI Caching Adapter

Chapter 4

UNIX LOCK/UNLOCK Driver Packages

This chapter introduces the installation procedures of UNIX LOCK/UNLOCK support for removable media devices. It is especially important for removable media devices that employ the caching capability supported by the DC-820B.

4.1. SCO UNIX V.3.2.2

This SCO UNIX driver is in the SCO/ISC UNIX drivers’ diskette. Since its driver diskette is UNIX-formatted and cannot be read from DOS, you may refer to the latest information in the README.TXT file on the DOS/NetWare driver diskette, if necessary. A similar function is default supported in the SCO UNIX V3.2.4. Also refer to the README.TXT file for installation procedures, if your driver diskette is a 3"1/2 (720KB) one.

Driver installation

To install the driver, insert a working copy of the UNIX driver diskette in drive A:

1.To prepare the installation for 360KB driver diskette, you must type: cd /dev

mv dsk/f0 dsk/f0.org ; mknod dsk/f0 b 2 132 mv rdsk/f0 rdsk/f0.org ; mknod rdsk/f0 c 2 132

2.At the prompt, type: installpkg

3.Press <Enter> to install from floppy driver 0

4.Press <Enter> to install the driver

5.Press <Enter> to confirm that SCO UNIX is being installed

6.To have the newly built UNIX take effect, reboot the system

7.To restore the status changed in step 0, you have to type: cd /dev

mv dsk/f0.org dsk/f0 mv rdsk/f0.org rdsk/f0

Driver removal

46