7.3: CROSSOVER
The crossover is mounted on the rear of the terminal panel. To inspect it, remove the panel by releasing the hexagonal screws.
Take care to avoid undue stress on the cables and components.
To remove the crossover completely the cables must be disconnected from the drive unit. Please proceed as above to remove the drive unit.
7.4: LIST OF SPARE PARTS
PART NUMBER |
| DESCRIPTION | |
|
|
| |
Type 1603 | Driver Kit | ||
|
|
|
|
Type 0294 | – 7900 | 0891B | High Frequency Unit |
|
|
|
|
Type 1464 | – 7300 | 0937 | Passive Crossover |
|
|
|
|
Further spare part details and factory part numbers can be found at www.tannoy.com
8.0: WARRANTY
NO MAINTENANCE OF THE REVEAL 6 MONITOR IS NECESSARY.
All components are guaranteed for a period of five years from the date of manufacture, subject to the absence of, or evidence of, misuse, overload or accidental damage.
For further information please contact your dealer or the distributor in your country.
If you cannot locate your distributor please contact:
Customer Services, Tannoy Ltd., Coatbridge, Strathclyde, ML5 4TF, Scotland
Telephone: 01236 420199 (UK) +44 1236 420199 (International)
Fax: 01236 428230 (UK) +44 1236 428230 (International)
Internet: http://www.tannoy.com
DO NOT SHIP ANY PRODUCT TO TANNOY WITHOUT PREVIOUS AUTHORISATION
This warranty in no way affects your statutory rights.
9.0: DECLARATION OF CONFORMITY
The following apparatus is/are manufactured in China for Tannoy Ltd of Rosehall Industrial estate, Coatbridge, Scotland, ML5 4TF and conform(s) to the protection requirements of the European Electromagnetic Compatibility Standards and Directives relevant to Domestic Electrical Equipment. The apparatus is designed and constructed such that electromagnetic disturbances generated do not exceed levels allowing radio and telecommunications equipment and other apparatus to operate as intended, and, the apparatus has an adequate level of intrinsic immunity to electromagnetic disturbance to enable operation as specified and intended.
This equipment conforms to the requirements of the EMC Directive 89/336/EEC, amended by 92/31/EEC and 93/68/EEC and the requirements of the Low Voltage Directive 73/23/EEC, amended by 93/68/EEC.
Details of the Apparatus: | Tannoy Monitor Loudspeaker |
Model Number: | Reveal 6 |
Applicable Standards: | |
| |
| Electrical Safety EN60065:1993 |
Signed: |
|
Position: | Technical Director |
Date: | 1 March 2005 |
For Tannoy Ltd |
|
12 | 13 |