Before Getting Started, Standard Accessories

Before Getting Started

Thank you for choosing the TASCAM T-3000 cassette duplicator.

To get the most out of your T-3000, spend some time now to read this manual. This manual is a reference book; if you read it thoroughly at least once, you will know where to turn when you need answers.

This manual is divided into the following sections:

Important Safety Precautions . . . . . . . 2

Important Safety Instructions . . . . . . . 3

Before Getting Started . . . . . . . . . . . . 4

Setting Up . . . . . . . . . . . . . . . . . . . . . . 5

Cassette Tapes . . . . . . . . . . . . . . . . . . . 5

How to Make Copies. . . . . . . . . . . . . . 6

Maintenance . . . . . . . . . . . . . . . . . . . . 6

Speciﬁcations . . . . . . . . . . . . . . . . . . . 7

Block Diagram . . . . . . . . . . . Back page

Standard Accessories

The T-3000 package includes the following in addition to the T-3000 itself, this manual and the warranty card:

ÉRack mount vis kit

ÉCable for connecting additional T-3000s

Installation Precautions

1. Operating Position

This unit is designed to be operated in vertical position.

2. Magnetic Field

Do not place this unit in the vicinity of televisions, amp transformers, speakers or other devices which utilize magnetic force.

3. Temperatures

Do not place this unit in locations subject to extremely high or low temperatures or to sharp temperature rise or drop.

4. Space for Ventilation

Do not place this unit in locations where no enough space is available for ventilation. Avoid also locations subject to aexcessive dust.

5. Horizontal and Solid Surfaces

It is risky to install this unit on inclined or unstable surfaces. Avoid this.

Mounting in a Rack (EIA standard 19-inch)

As for how to set the rear panel switch and connect the cable, refer to the section, "Setting Up" (p.5).

Remove the rubber feet, then use the provided rack mount vis kit to mount the unit in a rack, as shown.

4 TASCAM T-3000