Sceptre Technologies X246 manual If You Have VGA Connection on Your Video Card…

Page 15

If You Have VGA Connection on Your Video Card…

1.Make sure the power of X246 LCD MONITOR is turned off.

2.If you were previously using a CRT (bulky) monitor, please hook up your old monitor first and make sure your refresh rate is set to 60 Hz frequency before using the X246 LCD MONITOR. You can find the refresh rate information and change it by RIGHT CLICKING on the desktop with nothing selected. After you have right clicked, select the PROPERTIES option. Click on the SETTINGS tab. Click on the ADVANCED button. Click on the MONITOR tab. In that tab, change the refresh rate to 60Hz and click on APPLY. After the refresh rate changed, please shut down the computer and monitor.

3.Obtain the VGA cable and connect to the VGA connection on your PC. Connect the other end of the cable to your X246 LCD MONITOR.

4.Turn on the power of both the X246 LCD MONITOR and the PC.

Please Note :

The PC’s clearest picture is produced under 1920x1080 at 60Hz.

SCEPTRE X246

Page15

Image 15
Contents Important Information FCC Compliance Statement Page3 Page4 Tips and Safety Precautions Page6 Table of Contents Page8 Package Contents Installing or Uninstalling the BaseOpening the Package Setting Up Your Monitor Mounting Preparations Front View Identifying Front and Rear PanelSide View Control Buttons If You Have DVI Connection on Your Video Card… Connecting the LCDIf You Have VGA Connection on Your Video Card… If You Have Hdmi Connection on Your Cable or Satellite Box… On Screen Display OSD Menu Auto AdjustContrast / Brightness Input Select Audio AdjustInformation Color AdjustManual Image Adjust Memory Recall Setup MenuSupported Video Resolution Supported PC ResolutionProblem Possible solutions TroubleshootingPage25 Page26 How do I clean the LCD? Display panel SpecificationCall Us If You Need Help Limited Product Warranty Page31 Disclaimer & Copyright Information