Sceptre Technologies X246 manual Page6

Page 6

Do not overload power strips and extension cords. Overloading can result in fire or electric shock.

The wall socket should be installed near the equipment and should be easily accessible.

Only the marked power source can be used for the product. Any power source other than the specified one may cause fire or electric shock.

Do not touch the power cord during thunderstorms. To avoid electric shock, avoid handling the power cord during electrical storms.

Unplug the unit during a lightning storm or when it will not be used for a long period of time. This will protect the X246 LCD MONITOR from damage due to power surges.

Do not attempt to repair or service the product yourself. Opening or removing the back cover may expose you to high voltages, the risk of electric shock, and other hazards. If repair is required, please contact your dealer and refer all servicing to qualified service personnel.

Keep the product away from moisture. Do not expose this appliance to rain or moisture. If water penetrates into the product, unplug the power cord and contact your dealer. Continuous use in this case may result in fire or electric shock.

Do not use the product if any abnormality occurs. If any smoke or odor becomes apparent, unplug the power cord and contact your dealer immediately. Do not try to repair the product yourself.

Avoid using dropped or damaged appliances. If the product is dropped

and the housing is damaged, the internal components may function abnormally. Unplug the power cord immediately and contact your dealer for repair. Continued use of the product may cause fire or electric shock.

Do not install the product in an area with heavy dust or high humidity. Operating the product in environments with heavy dust or high humidity may cause fire or electric shock.

Hold the power connector when removing the power cable. Pulling the power cable itself may damage the wires inside the cable and cause fire or electric shocks. When the product will not be used for an extended period of time, unplug the power connector.

To avoid risk of electric shock, do not touch the connector with wet hands.

Insert batteries in accordance with instructions while using the remote control. Incorrect polarities may cause damage and leakage of the batteries, operator injury and contamination the remote control.

If any of the following occurs please contact the dealer:

o The power connector fails or frays.

o Liquid sprays or any object drops into the X246 LCD MONITOR.

o The Display is exposed to rain or other moisture.

o The Display is dropped or damaged in any way.

o The performance of the Display changes substantially.

Operating environment: Temperature: 5°C

~ 35°C, Humidity: 10% to 90%

non-condensing, Altitude: 0~10,000 ft.

Page6

SCEPTRE X246

Image 6
Contents Important Information FCC Compliance Statement Page3 Page4 Tips and Safety Precautions Page6 Table of Contents Page8 Package Contents Installing or Uninstalling the BaseOpening the Package Setting Up Your Monitor Mounting Preparations Identifying Front and Rear Panel Front ViewSide View Control Buttons Connecting the LCD If You Have DVI Connection on Your Video Card…If You Have VGA Connection on Your Video Card… If You Have Hdmi Connection on Your Cable or Satellite Box… Auto Adjust On Screen Display OSD MenuContrast / Brightness Audio Adjust Input SelectColor Adjust InformationManual Image Adjust Setup Menu Memory RecallSupported PC Resolution Supported Video ResolutionTroubleshooting Problem Possible solutionsPage25 Page26 How do I clean the LCD? Specification Display panelCall Us If You Need Help Limited Product Warranty Page31 Disclaimer & Copyright Information