Rosen M10 Owner’s Manual
INTRODUCTION
Congratulations on owning a Rosen M10 WIdescreen Monitor! Here’s a partial list of some things you can do with your M10:
·Display
·Transmit audio to single or
·Listen using the vehicle speakers or the wireless headphones.
·Control certain Rosen DVD players and TV Tuners with the front- panel controls or the supplied remote control.
·Send a different video signal to an optional second screen, using the M10’s
Precautions
In order to operate the system, the |
|
| ACC or engine |
vehicle ignition key switch must be |
|
| ON position |
|
| ||
|
in the ACC or engine ON position.
•Use this system only if properly installed by a qualified installer.
•If the M10 shows any sign of overheating or malfunction, close
the display and consult your dealer immediately. Do not open the unit - there are no serviceable parts inside.
•Do not press on the display surface - you might damage it.
•Clean the LCD panel with a slightly damp, soft cloth using
household glass cleaner. Do not use solvents such as benzene, thinner, or commercially available cleaners.
•When using portable radios and telephones near the system, picture or sound interference may occur.
•If your car was parked in a very cold or very hot place, you may
see a temperature warning on the screen instead of a picture. The picture will return after the system temperature returns to normal.
Note:
The system’s operating voltage range is
8