Important notes
The last setting will be stored automat- ically.
To switch off AUD: Press button once again.
If the setting remains unchanged with- in 8 seconds, the display will switch back to the previous condition.
Extra function AUD
Loudness - When listening at a low level, the Loudness function creates a more natural sound by boosting
the low frequency range.
Loudness on/off: Press AUD for ap- proximately 1 sec.
“LD” lights up in the display if the Loudness function is switched on. Please refer to chapter “DSC program- ming” for more information on how to program the Loudness boost.
Precautions
Before starting to use your new car radio, please read the following information care- fully.
Traffic safety
Traffic safety always has the highest priori- ty.
As the driver of a motor vehicle, it is your responsibility to pay attention to the traffic situation at all times. Never use your car radio in a way that could distract you.
Please keep in mind that you travel a dis- tance of 14 m per second at a speed of only 50 km/h.
Should the traffic situation become particu- larly demanding, we advise you not to use the radio.
Always make sure that you are still able to hear any warning signals coming from out- side of the vehicle, such as police or fire engine sirens, so that you can react accord- ingly.
Therefore, you should always select a mod- erate volume for playing your car radio while you are driving.
Installation
If you would like to install your new car ster- eo yourself or add other audio components to existing ones, then please read carefully the enclosed instructions on installation and connection.
In order to ensure that the set operates prop- erly it is necessary that the positive power supply line is connected to the ignition and the permanent +12 V lead.
Do not ground the loudspeaker outputs!
Accessories
Use only the accessories and spare parts approved by Blaupunkt.
28
