=
/ 
To switch the tape side: Press briefly.
To eject the tape: Press for approxi- mately 1 sec.
Extra function 
/ 
Frequency display during radio opera- tion:
Press button briefly.
The frequency will be briefly displayed.
>Cassette loading slot
Insert the tape with side A or 1 facing up, the open side showing to the right.
?SC
Radio operation
Scan
Press SC briefly.
The scanned frequency or the station name will start flashing in the display. During the actual scanning process
Preset Scan
Press SC for approximately 1 sec. until you hear a beep.
“SCAN” and the name or frequency of the scanned station will alternately ap- pear in the display.
The unit will scan all stations stored on the preset buttons.
To stop Scan / Preset Scan:
Press SC once again.
Tape operation
Cassetten-Scan
Press SC.
To stop cassette scan: Press SC once again.
@PTY (Programme Type)
In the PTY mode, the preset buttons become programme type buttons. With every preset you can select one pro- gramme type, such as for example
NEWS, SPORT, POP MUSIC, EDU- CATE, etc.
ADSC (Direct Software Control) Use the DSC function to customise certain programmable, basic settings
to suit your personal needs and prefer- ences. See chapter “DSC program- ming” for more information.
BAUD
To adjust the treble, bass, balance and fader.
If the display shows “TRE” or “BAS”, you can adjust the reproduction of the treble and bass frequencies with the rocker switch. If “BAL” or “FAD” is dis- played, you can set the balance (left/ right) and fader (front/rear).
Press AUD as many times as required and make the setting using the rocker switch.
Treble + / Fader front
Treble
Bass
Bass + / Balance right
DEUTSCH ENGLISH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS
27
