Savin 40105 Copying from the Multi Bypass Tray Tray, Set the side fences a to the paper size

Page 37

Copying from the Multi Bypass Tray (Tray 7)

Copying from the Multi Bypass Tray (Tray 7)

The multi bypass tray (Tray 7) can be used the same way as other trays. Also, thick paper of larger than A4 (81/2" ⋅ 11") size is available.

Note

❒	You cannot use the label paper in the multi bypass tray (Tray 7).
❒ The sizes of paper you can use with the multi bypass tray (Tray 7) are as fol-				2
	lows.

	Metric version	• Vertical: 139 – 305 mm

•Horizontal: 139 – 458 mm

Inch version

• Vertical: 5.5" – 12.0"

•Horizontal: 5.5" – 18”

❒The machine can automatically detect the following sizes as standard size copy paper.

Metric version	A3L, B4L, A4LK, B5K, A5KL, 11" ⋅ 17"L, 11" ⋅ 81/2"K, 51/2" ⋅
	81/2"L, 8" ⋅ 13"L
Inch version	A3L, B4L, A4K, B5K, A5L, 11" ⋅ 17"L, 81/2" ⋅ 11"LK, 51/2" ⋅
	81/2"LK, 8" ⋅ 13"L

❒The maximum number of sheets you can load into the bypass tray depends on paper type. The number should not exceed the upper limit.

❒If you want to use a size of paper other than those in the above table, be sure to specify the size. See p.29 “When copying onto regular size paper”.

A Set the side fences (A) to the paper size.

1

2

1

ZJAY040N

B Place paper in the multi bypass tray (Tray 7).

27

Image 37

Contents Copy Reference Page Means Power ON. c means Stand by Manuals for This Machine General Settings GuideCopy Reference this manual Printer ReferenceManuals for ScanRouter V2 Lite Manuals for DeskTopBinder V2 LiteOther manuals What You Can Do with This Machine Mix 1 & 2 Sided Table of Contents Storing Originals in the Document Server 110 Programs 112 Settings You Can Change with User Tools 126115 121154 Combination Chart 141 Supplementary Specifications 142Symbols How to Read This ManualPreparation LimitationMachine Types Functions that Require Options Control Panel Program key Tray Paper Settings keyStop key Start keyPage Originals Sizes and Weights of Recommended OriginalsMetric version Inch versionSizes Detectable by Auto Paper Select Exposure glass Missing Image AreaSizes difficult to detect Original Orientation Placing OriginalsStandard Orientation ADF Exposure glassSelect the original orientation TurnPress Reverse Orientation Reverse orientationLift the exposure glass cover or ADF Placing Originals on the Exposure GlassPositioning mark Left scale Lower the ADFPlacing Originals in the Auto Document Feeder ADF Press Special Original Batch modeMixed size mode Sadf modePress Mixed Sizes and then OK Thin modePress OK Place originals, and then press the Start key Placing custom size originalsMake sure the machine is in Copy mode Basic ProcedureInitial copy display To confirm settings When clearing entered valuesMake sure no previous settings remain To stop the machine during a multi-copy runWhen the machine continues copying When the machine stops scanningAuto Start Interrupt CopyLeft Original Beeper Job PresetTo check job contents Editing job presetPress Change Job Settings Check contents Press OKTo delete a job after checking its contents To change job contents after checkingDeleting a job Copying onto OHP transparencies Copying onto Special PaperCopying onto tab stock Copying Set the side fences a to the paper size Copying from the Multi Bypass Tray TrayPlace paper in the multi bypass tray Tray Press the elevator switch on the multi bypass tray Tray When copying onto regular size paper Setting the tab stock in multi bypass tray TrayWhen copying onto custom size paper Press Select Regular SizePress the # key Select paper type in Special paper When copying onto special paperCopy Functions Adjusting Copy Image DensityAuto image density Manual image densitySelecting Original Type Setting When the dark background is selected When the original type keys are not displayedSelecting Copy Paper Auto Paper SelectAuto Paper Select When the paper type keys are not displayedManual Paper Select Press Auto Paper SelectPress Reduce/Enlarge Preset Reduce/EnlargePress Create Margin ZoomAuto Reduce/Enlarge To enter a ratio using the number keysTo select a ratio with n and o Enter the ratioPress Auto Reduce/Enlarge Where original is placed Original size and orientationPress Reduce/Enlarge Press Size Mag Size MagnificationTo specify a ratio with n and o Directional Magnification %Horizontal ratio Vertical ratio Press Reduce/Enlarge Press Direct. Mag.%Directional Size Magnification inch Adjust the horizontal ratio using n or oPress Reduce/Enlarge Press Dir. Size Mag Sort Sample copy Press Enter the number of copy sets using the number keysIf the sample is acceptable, press Print When Copying is displayed, press the Stop key When memory is fullChanging the number of sets Press Change QuantitySeparation Shift tray off in sort/stackPress Output/Cstmz. Function Staple StackReference Stapling position and original setting Select one of the stapling positions Holes PunchADF Punch hole positionsSelect the punch position Sided → 2 Sided DuplexPlace the originals, and then press the Start key Press Dup./Combine/Series Originals and copy orientationOriginal orientation and completed copies Sided, 2 Pages → Combine 1 Side Sided CombineSided, 4 Pages → Combine 1 Side Sided, 1 Page → Combine 1 Side Sided, 8 Pages → Combine 1 SideCopies 4 two-sided originals to one side of a sheet Press Combine To change the copy orderPress Copy Order Sided, 8 Pages → Combine 2 Side Sided, 4 Pages → Combine 2 SideSided, 16 Pages → Combine 2 Side Front BackGCSHVY2E Press Dup./Combine/Series Press Combine Sided → 1 Sided Series CopiesBook → 1 Sided Check that Auto Paper Select is selected Book → 2 Sided Copying Book OriginalsMulti → 2 Sided BookletMagazine Press Left and Right → 2 Sided Reference Press BookPlace originals, and press the Start key Press Front and Back → 2 Sided Reference Booklet How to fold copies to make a bookletSet the orientation with the User Tools Press Book Press 1 Sided or 2 Sided for originals Magazine How to fold and stack copies to make a magazinePress Booklet Press 1 Sided or 2 Sided Press Magazine Press Dup./Combine/Series Press Mix 1&2 Sided Mix 1 & 2 Sided