Setting up Your Rise & Shine, Unpacking

Setting up Your Rise & Shine®

Unpacking	Front Panel

Please check your shipping carton for the following items:

•Verilux® Rise & Shine Natural Sleep System

•AC power cord

• External FM antenna	9

•Secure Digital (SD) Card containing natural ambient soundscapes and wake-up tones. This card can be found in the SD card reader opening (see number 9 in the image above).

Selecting a location

•Place your Rise & Shine on a table or other ﬂat surface near your bedside.

•For best performance, place it within two feet of a wall and avoid placing it in a corner.

•Avoid placing it on a metal surface; this could interfere with FM reception.

•Avoid placing close to heat-radiating products, such as heaters. Do not place on top of appliances that radiate heat.

•No naked ﬂame sources, such as lighted candles, should be placed on this device.

Connecting to Power

1.Plug the AC power cord into the power connector on the rear panel labeled 120V-60Hz.

2.Plug the other end of the AC power cord into an AC wall outlet.

Connecting an Auxiliary Lamp

If you wish to supplement the Rise & Shine LED light panel with an auxiliary lamp:

Plug the AC power cord of a lamp with an incandescent bulb of not more than 100 watts into the Auxiliary Lamp connector socket on the rear of the Rise & Shine.

Note: ONLY designed to power a lamp, not for use with other electrical devices.

WARNING: Do not plug any device into this slot other than auxiliary lamp.

CAUTION: Only use lamps with incandescent bulbs of 100W or lower as a light supplement with the device.