SettingTroubleand UsingShootingLIGHTSanitizingand DISPLAYWand SET
LIGHT SET determines whether the LED light panel, an auxiliary lamp or both are controlled by the Brightness Control. This allows you to use either or both light sources during everyday use, at the brightness you wish, when not in Wake or Sleep mode. Wake and Sleep modes have individual controls for both light sources.
Light Settings
1. Press the Menu Button.
From the Main Menu:
2. Use the Selector Control Dial to highlight LIGHT SET: TOP AND LAMP (TOP AND LAMP is the default setting).
3.Press the Selector Control Dial.
4.From the LIGHT SETTINGS
5.Press the Selector Control Dial to choose the highlighted selection.
The Light Setting is changed and the display returns to the Main Menu.
MAIN MENU
TIME SET
WAKE SET
SLEEP SET
AUDIO SET
LIGHT SET: TOP AND LAMP
DISPLAY SET: MEDIUM EXIT
IME SET
LIGHT SETTINGS
WAKE SET
TOP ONLY
SLEEP SET
LAMP ONLY
AUDIO SET
TOP AND LAMP IGHT SET: LAMP ONLY DISPLAYNONES T: MEDIUM XIT
The DISPLAY SET item on the Main Menu is used to set the display brightness.
Display Brightness Settings
1. Press the Menu Button.
From the Main Menu:
2. Use the Selector Control Dial to highlight
DISPLAY SET: MEDIUM (MEDIUM is the default setting).
3.Press the Selector Control Dial.
4.From the DISPLAY SETTINGS
5.Press the Selector Control Dial to choose the highlighted selection.
The display Brightness setting is changed and the display returns to the Main Menu.
MAIN MENU
TIME SET
WAKE SET
SLEEP SET
AUDIO SET
LIGHT SET: LAMP ONLY
DISPLAY SET: MEDIUM EXIT
IME SET
DISPLAY SETTING WAKE SET
LOW
LEEP SET
MEDIUM
UDIO SET
HIGH
IGHT SET: LAMP ONLY
ISPLAY SET: LOW
21