SettingTroubleand UsingShootingSLEEPSanitizingSET — Wandcontinued
4.Press the Selector Control Dial to choose the highlighted selection.
The display returns to the SLEEP SETTINGS menu.
Backlight Settings
The BACKLIGHT Setting determines whether the display backlight is on or off after the Sleep Cycle completes. If you’d like no display light whatsoever after the Sleep Cycle ends, select OFF.
DURATION: 5 MINUTES ON
IGHT: TOP AND LAMP OFF
BACKLIGHT: ON
OUND: NONE
1.Use the Selector Control Dial to highlight BACKLIGHT: OFF (OFF is the default setting).
2.Press the Selector Control Dial.
3.From the
4.Press the Selector Control Dial to choose the highlighted selection.
The display returns to the SLEEP SETTINGS menu.
Note: Sleep Mode will last 12 hours unless the cycle is interrupted on your Rise & Shine® product. If you wish to exit out of Sleep Mode, you can turn any one of the 3 dials: Brightness, Volume or Audio Source to immediately terminate the cycle.
Note: Pressing any of the buttons once the display is off will brighten the display for 5 seconds so you can read the time or make any adjustments necessary.
Sound Settings
1. Use the Selector Control Dial to highlight SOUND: NONE (NONE is the default setting).
2. Press the Selector Control Dial.
3.From the SLEEP SOUND
Control Dial to choose MP3 SD, MP3 USB, FM RADIO or NONE.
4.Press the Selector Control Dial to choose the highlighted SLEEP SOUND setting.
If you chose MP3 SD or MP3 USB, you will be presented a further selection display where you can choose an SD, USB alarm song or other audio file.
5.The display returns to the SLEEP SETTINGS menu.
If you highlight FM RADIO and push the Selector Control Dial to select, the display returns to the SLEEP SETTINGS menu with the last chosen FM frequency highlighted.
6.Turn the Selector Control Dial to change the sleep FM frequency, as desired.
19