Verilux VA04 manual Listening to SD MP3 Songs, Inserting an SD Card, Removing an SD Card

Page 24

ListeningTroubletoShootingUSBMP3SanitizingSongs — continuedWand

2.Press the Selector Control Dial to open the folder and display the MP3 files.

3.Use the Selector Control Dial to highlight an MP3 file.

4.Press the Selector Control Dial to choose the file.

The display returns to the Time/Date display. The MP3 file begins to play and the file’s title is shown at the bottom of the display.

To pause while listening to USB audio, press the Selector Control Dial. PAUSED will be shown on the display. To resume play, press the Selector Control Dial again.

Note: If the USB is removed during play, the display will indicate “device not found” and then go to the time display.

Listening to SD MP3 Songs

The SD/MMC Card Reader is used to listen to MP3 files on Flash Memory Secure Digital (SD) Cards, also known as Multi-Media Cards (MMC). An SD card with pre- recorded selections is included with your Rise & Shine®.

SD Card memory capacity varies. Your Rise & Shine can play audio on all standard SD Cards, up to 2 gigabyte (GB) capacity. There are also limits of not more than 800 MP3 files and not more than 100 directories (or “folders”) per SD Card.

Note: Only MP3 files can be played and only directories containing MP3 files will be displayed.

Inserting an SD Card

Insert an SD Card into the SD/MMC Card Reader slot on the front panel. Insert the card with the label up and the exposed pins facing down. As you push in the card, you’ll notice a slight springy resistance. Push a bit more until you feel the card stop. When you release your finger, the card will engage and spring back very slightly to be almost flush with the front panel.

Removing an SD Card

To remove an SD Card, push it in with your finger and release. The card will spring out slightly, and you can easily remove it.

24

Page 23 Page 25
Image 24
Page 23 Page 25
Contents VA04 Page Table of Contents Important Safety Instructions Important Safety Instructions FCC Compliance Guide to Features Front PanelBack Panel Introduction Sound optionsLight options Setting up Your Rise & Shine Connecting to PowerConnecting an Auxiliary Lamp UnpackingOperating Your Rise & Shine Selector Control DialAudio Input Selector Controlling the Volume Using the Brightness ControlTrouble ShootingUsingTIMESanitizingSET Wand Setting the ClockSetting Wake Cycle Setting the Wake TimeDuration Settings Light SettingsVolume Settings Sound SettingsPlay Mode Settings Using Snooze Setting and Using Sleep SETChoosing Sleep Settings Options SettingTroubleand UsingShootingSLEEPSanitizingSET Wand Backlight Settings Setting and Using Audio SET Bass and Treble SettingsDisplay Brightness Settings Setting and Using Light and Display SET Listening to FM RadioTroubleListningShootingto USBSanitizingMP3 SongsWand Listening to SD MP3 Songs Inserting an SD CardRemoving an SD Card Using the Supplied Verilux SD Card Choosing and Playing an MP3Pausing Play Listening to AUX Devices To Connect an Audio Device to AUXUsing Headphones Using the External FM AntennaMaintaining Your Rise & Shine Changing the Fuse Troubleshooting Problem What to doPlease visit http//support.apple.com Selector Control Dial to unmute Break the cycle and return to the current Technical Specifications One Year Limited Warranty Mad River Park, Waitsfield, VT
Related manuals
Manual 27 pages 51.64 Kb
Top Page Image Contents