Uniden UBC60XLT manual Mounting the Flexible Antenna

Page 8

AC Adaptor/Charger

I

Use the optional AC Adaptor/Charger to power the UBC60XL T from an AC source.

The AC Adaptor/ Charger also recharges Nickel-Cadmium

Batteries while they are installed in the scanner.

WARNING! Do not charge Alkaline Batteries in this scanner. Doing so may cause serious damage to the product and void the waffanty. Before attempting to recharge Batteries, make sure you have installed four rechargeable Nickel-Cadmium Batteries and the selector switch is set to "Ni-Cd" .

Mounting the Flexible Antenna

[I;HDI~~

Installing the Belt Clip

CAUTION: Do not tighten the screws too tight. You could damage the case or clip.

6

Image 8
Contents UBC60XLT Precautions Table of Contents About Your New UBC60XLT Utility LJ@ IF e Mounting the Flexible Antenna If1 Programming Channels Ff!.~ ~ yPress How Squelch Works NoiseSetting the Squelch Scanning Programmed Channels~ . . ~ ~ \£ Channel Lockout PressJ, CDScanning Mode ~\t!! .~ Press Proper Care of Your Scanner Replacing the BatteriesLocation =oY Operating Ti~s Condition Suggestion Technical S~ecifications Warrant~ LJ@ Uniden@