Charging the Batteries
Issue 4 October 2008 17

Installing the Charger

To operate the charger a mains connection is required. Check if the mains voltage matches the
adapter mains voltage.
Connect the cable on the plug-in AC adapter to the terminal on the bottom of the charger and
plug the AC adapter into the mains socket.
Mains plug
Charging the Batteries

Initial Setup and Operation

Charge the batteries approximately 6 to 7 hours before using the telephone. This protective
measure extends the service life of the batteries.
The maximum power output is only attained after three to five charge and discharge cycles.
When replacing the batteries, ensure the correct polarity. Use only rechargeable AAA NiMh
battery of 800 mAh, 1.2V. The manufacturer does not accept liability for malfunctions or damage
caused by using other battery types or normal batteries.