Programming/Editing Optional Settings
This section details the instructions for each of the optional programming steps referred to in “Programming Radio Systems” on Page 43. Use the instructions in the appropriate section to enter or edit a setting.
System-Level Settings
Editing the System Name
Menu
Program System
Select the system
Edit Name
To enter a letter, turn the scroll control until the character you want appears. To enter a decimal point,
press . To move the cursor to the left, press /4 or hold Func and rotate the scroll control to the left.
To move the cursor to the right, press 6/ or hold Func and rotate the scroll control to the right.
To clear a character, press twice. To clear all characters, press 3 times.
To accept an entry, press E or press down on the scroll control.
Hints:
•Each system name can be up to 16 characters. Abbreviate as necessary to fit.
Editing the System Quick Key
Menu
Program System
Select the system
Edit Sys Option
Set Quick Key
After selecting this option, select any number from
46