Editing a Custom Search Range
You can edit up to 10 custom search ranges. The names of the custom search ranges appear on the display. The default custom search range names appear as Custom 1, Custom 2, and so on.
Menu
Search for ...
Edit Custom
Select your setting, then press the scroll control.
Edit Name - lets you edit the custom search range’s name
Edit Srch Limit - lets you view and select the frequency ranges to search. The scanner prompts you to enter the upper and lower search limits.
Set Delay Time - lets you set the amount of time the scanner will delay before continuing to search after a transmission ends
Set Modulation - lets you set the custom search range’s modulation type
Set Attenuator - lets you set whether the scanner will attenuate reception by 25 dB during search
Set Data Skip - lets you set whether the scanner will skip data transmissions during search
Set Step - lets you set the custom search range’s step (the gap between frequencies)
Search with Scan - sets whether the scanner includes the custom search during scanning.
Set Lockout - lets you set whether the scanner will scan the custom search range during scanning
Lockout - the custom search range is not scanned during scanning
Unlocked - the custom search range is scanned during scanning.
Note: Your can also lock or unlock a custom search range by pressing Func + L/O. Or, you can select a
Searching and Storing
61