In the menu bar down the left side of the screen, select WAN.
In the top menu bar, select WAN Settings. This will open the WAN Configuration screen.
(See Figure #7)
Select the radio button labeled SPECIFY FIXED
WAN CONFIGURATION.
Figure #7
Enter the IP Address, Subnet Mask, and Gateway Address provided by your ISP.
Click SAVE WAN CONFIGURATION.
When the utility displays a window telling you it must reboot the phone, make sure your broadband modem is connected to your phone's WAN port, then click OK. When the phone finishes rebooting, it will ask your broadband modem to assign an IP address.
(See Figure #8)
NOTE: For detailed installation with a Static IP address, please refer to the UIP1868P User Interface Guide – WAN Configuration section.
Figure #8
You are now ready to activate your Packet8 account. (Please refer to the Uniden Quick Start Guide instructions for activating your Packet8 account.)
You can download a copy of the UIP1868P User Interface Guide at http://www.packet8.net/support/faqs/
UPZZ76747EZ(0)