Uniden 3315+1 owner manual Setting up the Menu, DirectLink Mode, Entering the Menu

To enter DirectLink mode press [SELECT]

Setting up the Menu

Entering the Menu

1)	Press the	/del key in standby mode.
			DirectLink Mode
2)	Use /vol/	or /vol/ to move the pointer to
	a desired main menu (DirectLink Mode, Room		Room Monitor
	Monitor, Handset Setup, Global Setup, and		Handset Setup
	System Reset).

3)Press to select the desired main menu.

4)Use /vol/ or /vol/ to select a desired submenu, and then press

to enter.

In the submenu, use /vol/ or /vol/ to select an item. Press

to confirm your selection. For detailed instructions, see the following sections for the desired submenu.

5)To exit the menu, press or return the handset to the cradle.

DirectLink Mode

Entering the Two Way Communication between the

Handsets Anywhere without the Base

1) Enter the DirectLink Mode menu (see “Entering the Menu” on page 11). To enter DirectLink mode press [SELECT] appears.

2)Press to enter the DirectLink mode. You will hear a confirmation tone, and DirectLink Mode Complete appears.

To adjust ringer volume, press /vol/ or /vol/ to select one of three ringer volume (off, low, or high).

3)To return back to the normal mode, exit the DirectLink mode.

Press /del, and then , or return the handset to the cradle. DirectLink Mode Cancel appears.

To back to the previous screen,

press / del.

[ 11 ]