Uniden 3315+1 owner manual Setting the Dial Mode Australia only, Copy Phonebook

Setting the Dial Mode (Australia only)

1)Enter the Global Setup menu, and then the Dial Mode submenu (see “Entering the Menu” on page

11).

2)Press /vol/ or /vol/ to change the select, Tone or Pulse (the initial setting is Tone).

3)Press . You will hear a confirmation tone.

Dial Mode

Tone

Pulse

•If you receive a call the transfer will be canceled.

•If an error occurs, the phonebook locations transferred before the error were stored in the receiving handset.

Unavailable appears on the display.

•When the memory of the receiving handset is full, Not enough memory in Receiving Handset appears. You cannot transfer the phonebook location.

Copy Phonebook
	Copy	Phonebook
1) Enter the Global Setup menu, and then the Copy
	One	Memory
Phonebook submenu (see “Entering the Menu” on
page 11).	All	Memory	:xxx

2)Press /vol/ or /vol/ to choose One

Memory or All Memory, and then press . If you choose All Memory, go to step 4.

3)Press /vol/ or /vol/ , or the number keypad (0-9) to select the phone-

book location you want to export, and then press .

4)Press /vol/ or /vol/ to select the handset to which you want transfer

the phonebook locations, and then press .

If you choose All Memory in the step 2, Are you sure? appears.

Press /vol/ or /vol/ to select Yes, and then press .

The phonebook locations will be transferred to the handset. On the receiving handset, Receiving and the handset name appear. When the transfer complete, Done! appears on the handset.

[ 16 ]