Using One Touch Voice Mail Access
If you subscribe to voice mail service, you can use your phone to access your voice mailbox. The new message LED flashes whenever you have messages waiting in your voice mailbox. Just program the handset with your access number, and you can get your messages at the touch of a button on the handset. (The voice mail service provider will supply you with the access number. This number may be simply a phone number. Refer to the provider’s literature).
•To program or delete your Voice Mail Access Number, See page 12.
Dialing your Voice Mail Service
Once you’ve programmed your personal access number, you can dial your mailbox with the touch of a button. When you have messages, simply pick up
the handset and press 
. If you have not entered the access number
or it has been deleted, when you press the 
, No Number Stored To store number press [MENU] appears and you will hear a beep. The phone returns to standby mode.
Voice Mail Access
The new message LED on the handset is designed to work with your voice mail service provided by your local telephone company. The LED flashes when you have new incoming messages in the voice mail service. You may need to occasionally reset the indicators if they remain on after you’ve retrieved your messages. To reset the indicators, when the phone is in
standby mode press and hold 
on the base until the paging sound stops (about 5 seconds).
•You must subscribe to voice mail service from your telephone company in order to use this feature. The voice mail service company will provide you with the access number.
•Voice Mail Access Numbers : Australia Message Bank : 125101
Home Messages: 101
New Zealand Call Minder : 083210
[ 25 ]