Uniden BC796D APC0 25 manual Programming Trunked Systems

Selecting Talkgroup Lists to Scan	24
Holding on a Single Talkgroup	24
Locking Out Talkgroups	24
EDACS Blockout	25
Unlocking All Talkgroups	25
EDACS Patch Tracking	25
Searching	26
Holding on an Active Frequency	26
Setting Chain Search	26
Setting Data Skip	26
Skipping Frequencies	26
Storing Found Frequencies	27
Automatically Storing Frequencies	27
Setting Subaudible Tones for Searching	28
Searching for Subaudible Tones	28
Attenuating All Search Ranges	28
Setting DELAY for All Search Ranges	28
Setting a Search Range	29
Searching for Trunk Systems	29
Service Search	31
Service Search Skip	31
Using Weather Search and Weather Alert (SAME)	32
Searching for a Weather Broadcast	32
Using Weather Alert (SAME)	32
Testing the Weather Alert	33
Programming Bank Information	34
Bank Configuration	34
Assigning Bank Names	34
General Programming	35
Deleting Frequencies from Channels	35
Transferring Channel Information	35
Entering Alpha Information	35
General Programming Tips	35
Programming Conventional Channels	37
1. Select a Channel to Program	37
2. Enter the Frequency	37
3. Assigning a Text Tag	37
Setting the Delay	38
Setting the Subaudible Tone Option	38
Setting Beep Alert	39
Setting the Attenuator	39
Changing the Frequency Step	39
Setting the Modulation Mode	40
Setting Priority Channels	40
Programming Trunked Systems	41
Setting Trunking Delay	42
Using I-Call (Motorola and EDACS only)	42
Turning I-Call On and Off for ID Search	42
Turning I-Call On for ID Scan	42
Setting Priority Talkgroups (Motorola and EDACS only)	43
Multi-Track	43
Multi-Track Operational Details	43
Programming Motorola Systems	45
Using Control Channel Programming	45
Programming Type 2/Digital 800 and 900 MHz Systems	45
Programming Type2/Digital VHF and UHF Systems	46
Programming Type I and IIi Hybrid Systems	47