12SEARCH/AM — In Scanner mode press to start a Limit Search or to resume searching. In AM/FM mode, press to select the AM memory bank.
In Service mode, press to select the POLICE service.
13L/O FM1 — In Scanner mode, press to lock or unlock a channel memory in SCAN (HOLD) or PROGRAM mode.
In Search mode, press to set or clear a selected frequency previously locked out in the LIMIT SEARCH or SERVICE SEARCH (Hold) mode. In AM/FM mode, press to select the FM1 memory bank.
In Service mode, press to select the FIRE/EMS service.
14DELAY/FM2 — In Scanner mode, press to turn the delay option on/off. In AM/FM mode, press to select the FM2 memory bank.
In Service mode, press to select the AIR service.
15PRI/MEM — In Scanner mode, press to set a Priority channel for Scan Hold mode and Program mode.
In Service mode, press to select HAM service.
In Program mode, press to set the Priority channel setting. In SCAN and SCAN HOLD, press to set Priority Scan on or off.
In AM/FM mode, press to select Memory Mode to allow quick channel recall using the
16SVC/DIR — In Scanner mode press to change to Service Search mode. In AM/FM mode, press to change to Direct Entry mode to allow channel frequency selection using the up / down arrows or
In Service mode, press to select the MARINE service.
17MODE Switch — Use to select the desired mode: AM/FM; Weather; Scanner. (Slide switch must be set to Clock)
18▼ — Press and release to move down through channel numbers in the following HOLD modes: SCAN, PROGRAM, SERVICE SEARCH, and WX or the step frequency in LIMIT SEARCH, and AM/FM mode. (refer to the frequency and step table on page 9)
Press and hold for more than 1 second to have the changes run continuously.
19▲ — Press and release to move up through channel numbers in the following HOLD modes: SCAN, PROGRAM, SERVICE SEARCH, and WX or the step frequency in LIMIT SEARCH, and AM/FM mode. (refer to the frequency and step table on page 9)
Press and hold for more than 1 second to have the changes run continuously.
20HEADPHONE Jack — lets you use an headphone for private listening.
21Antenna Connector — connect an external antenna using a BNC connector. AM RADIO ANT connector — connect the supplied loop antenna and position it for best AM Broadcast radio reception.
Introduction
14