Features
Channel Memory Scanning — Scans frequencies you have stored in any of the channels or banks at a rate of up to 60 channels per second.
Memory Availability — Store and then scan any of up to 100 channels distributed over 10 banks.
Direct Channel Access — Press 0 − 9 and HOLD to directly access any stored frequency.
Channel Lockout/Frequency Lockout — Skip over stored frequencies (channels) using the Lockout feature to enable faster scanning. Lets you designate up to 50 frequencies to skip during a search (limit or service) to increase the scanning speed.
Alarm Clock with Snooze — provides standard radio broadcasts that you can set as your alarm sound.
AM/FM and TV
Priority Channel — Designate a specific frequency as a Priority Channel. Then the radio scans and checks that channel every 2 seconds. Select and designate up to 10 frequencies as Priority Channels (one per bank).
Duplicate Channel Alert — Lets you know that a selected frequency has already been programmed into memory if you attempt to store it again.
Limit Frequency Searching — Lets you designate lower and upper frequency range and search within that range for active frequencies. You can then store frequencies in memory as channels for later recall.
Service Search — Lets you designate one of the five preprogrammed service channels (Police, Fire/EMS, Air, Ham, Marine) to search.
Weather (WX) Scan — Scan the preprogrammed weather channels.
Scan and Search Speed
• Scan Speed | 60 channels per second maximum in SCAN MODE. |
• Search Speed | 60 steps per second maximum in SEARCH MODE. |
•TURBO MODE For frequency steps 5kHz apart, searching occurs in Turbo Mode which is 180 steps per second.
Introduction
10