Using the Alarm Clock
Your scanner’s Clock displays whenever you turn off the radio functions. It can also be used as a standard alarm clock.
Setting the Current Time
Follow the steps to set the current time:
1. Move the slide switch to Clock Set. The hour digits flash.
2. Press ▲ or ▼ to change the hour by one hour increments or press the number keys to select the present hour. Then press E/PGM to set the hour. The minutes digits flash.
3.Press ▲ or ▼ to change the minute setting by one minute or press the appropriate number keys to enter the minutes. The seconds reset to 00. Press E/PGM, AM/PM flashes.
4.Press ▲ or ▼ to select AM or PM. To make your selection, move the slide switch to Clock. The scanner exits the clock setting mode.
Setting the Alarm Clock
Follow these steps to set the alarm time:
1. Move the slide switch to Alarm Set. The hours digits flash.
2. Press ▲ or ▼ to change the hour by one hour increments or press the number keys to select the present hour. Then press E/PGM to set the hour. The minutes digits flash.
3.Press ▲ or ▼ to change the minute setting by one minute or press the appropriate number keys to enter the minutes. Press E/PGM to set the minutes. The AM/PM display icon flashes.
4.Press ▲ or ▼ to move from AM to PM and back. Press E/PGM to make your selection. To lock in the alarm time, move the slide switch to Clock.
Using the Alarm Clock
18