Uniden BC 235XLT specifications Troubleshooting, Problem Suggestion

Troubleshooting

If your BC60XLT-1is not performing properly, try the following steps.

Problem		Suggestion
Scanner won’t work.	1.	Check the connections at both ends of
	the AC Adapter.
	2.	Turn on the wall switch of your room. You
		could be using an outlet controlled by the
		wall switch.
	3.	Move the AC Adapter to another wall
		outlet or replace the batteries.
Improper reception.	1.	Check the antenna connection or move
	and reposition the antenna.
	2.	Move the scanner.
	3.	You may be in a remote area which could
		require an optional multi-band antenna.
		Check with your dealer or local
		electronics store.
Scan won’t stop.	1.	Adjust squelch threshold - refer to
	page 10, Setting the Squelch.
	2.	Check the antenna connection.
	3.	Check to see if many of the channels are
		locked out. If so, the scanner has less
		chance of finding an active channel.
	4.	Review each channel’s frequency to see
		if it is still stored in memory and is correct.
	5.	It’s possible that none of the programmed
		frequencies are currently active.
Scan won’t start.	1.	Press the Skey again.
	2.	Adjust the SQUELCH control.
	3.	Check to see if all channels are locked
	out.
Weather Scan won’t work.	1. Adjust squelch threshold - refer to
	page 10, Setting the Squelch.
	2.	Check the antenna.

If you still cannot get satisfactory results and want additional information, or to return the unit for service, please call or write the Uniden Parts and Service Division. The address and phone number are listed in the Warranty at the end of this manual, or call 1-800-297-1023.

33