Channel Skip
If a particular channel continues to interrupt search scanning, it is possible to set your scanner to skip the frequency.
If your scanner stops while searching, press N to lockout the frequency from the search range.
Note: You can program 10 skip frequencies. The 11th skip frequency entered causes the 1st skip frequency to unlock.
To unlock all skip frequencies at once, follow these steps:
1. Press either U or Dduring a search.
Note: You must be in Search Hold before restoring all skipped frequencies.
2. Press and hold N for about two seconds.
You will hear two beeps when all the channels have been restored.
Storing Search Frequencies
You can quickly store any frequency you find during Search.
Caution: You must select the channel in which you will store the frequency before entering the search mode. Otherwise, you may erase a stored frequency that you want to keep.
27