Uniden BC 235XLT specifications Weather Scan

Page 30

Weather Scan

Your BC60XLT-1is designed to scan 7 programmed NOAA frequencies, so you easily find your local NOAA weather broadcast.

Note: It is not advisable to program a weather frequency into one of the 30 channels since weather channels transmit continuously. The scanner will remain on the weather channel, disrupting the scanning cycle.

1. Press W to activate the Weather scan.

Note: Be sure SQUELCH is set properly.

2. When the Weather Scan finds an active weather channel, it stops.

3. Press W again to find the next active weather channel.

Note: In some parts of the country, you may not be able to monitor weather broadcasts, such as in low-lying areas. Normally, a higher location or a better antenna improves reception.

4.To exit Weather Scan, press M, S, or R.

30

Image 30

Contents Table of Contents What is Scanning? What is Searching?Introduction Types of Communications FrequencyTransmission RangeFeature Highlights Where to Obtain More Information Included with Your Scanner Setup Installing the BatteriesAC Adapter/Charger Charging WarningAdapter Safety Feature Flexible AntennaBelt Clip Setting the Squelch Basic OperationStrong Signals Medium Signals Weak Signals Keylock Programming Duplicate Frequency Alert Programming Tips Scanning Lockout in Manual Mode Channel LockoutLocking a Channel While Scanning Lockout TipsRestore a Locked Out Channel Restore All Locked-out Channels Priority Scan Changing the Priority Channel Setting a Search Range Chain SearchPage Page Search Hold Feature Channel Skip Storing Search FrequenciesChain Page Weather Scan General Use Care and MaintenanceCleaning LocationRepairs BirdiesTroubleshooting Problem SuggestionSpecifications Frequency RangeAccessories and Replacement Parts One Year Limited Warranty Uniden America Corporation. All rights reserved