TORO GM | Mitsubishi K3D Diesel Engine 31 |
|
|
1.Nozzle Leakage Test.
∙The leakage test checks the nozzle tip for proper sealing.
∙A leaking nozzle should be repaired or replaced.
2.Operate the pump until 1500 psi (108 kg/cm²) is reached, maintain this pressure.
3.Check the nozzle end.
∙If the nozzle end is dry or a slight film of fuel is present, the nozzle is OK.
∙If a drop of fuel forms or the nozzle drips fuel, the nozzle must be serviced or replaced.
Notes
________________________________________________________________________________________________________________
________________________________________________________________________________________________________________
________________________________________________________________________________________________________________
________________________________________________________________________________________________________________
________________________________________________________________________________________________________________
________________________________________________________________________________________________________________
________________________________________________________________________________________________________________
________________________________________________________________________________________________________________
________________________________________________________________________________________________________________