Vista LM104-P50 manual Table of Contents

Page 2

TABLE OF CONTENTS

Product Overview	1
Module Setup	2
Jumper Settings	3
Software Driver Installation	5
Cable Grounding and Termination	7
Troubleshooting	10
Appendices
A. Specifications	11
B. PC/104 Bus Signal Assignments	12
C. Connector and Jumper Pinouts, Options 1/2/3/6	13
D. Connector and Jumper Pinouts, Options 5/5C	14
E. Echelon-approved Wire Manufacturers	15
F. Concerning Conformal Coatings	16
G. Additional Information	17
H. Limited Warranty	18

ii

Image 2

Contents LM104-P50 Table of Contents Product Overview LM104-P50 Network Interface OptionsModule Setup Important NoteJumper Settings JP1 ServiceJP5 IRQ Select Software Driver Installation Device = Drive \PATH\ LM104INT.SYS SwitchesDEVICE=C\LON\LM104INT.SYS /D1 /P1 /Q5 Cable Grounding Cable Wiring and TerminationCable Grounding and Termination Option 1 RS-485Options 2 and 3 Twisted pair transceivers Termination of an LM104-P50-1 RS-485 network nodeOption 5 Power line carrier transceivers Option 6 Free Topology TransceiverTroubleshooting Mechanical User ConnectorsAppendix a EnvironmentalAppendix B J1/P1 J2/P2 Number Row a Row B Row C Row DAppendix C No Connection NETAppendix D IRQ SelectAppendix E ConnectAir International Eastman Wire & CableWindy City Wire Appendix F Concerning Conformal CoatingsPC/104 Specification, Version Echelon literature Appendix GWarranties Exclusive Standard Warranty ServiceAppendix H Limitation of Liability