Installation, Install Stand Set on Mobile Rack

Power Adapter	+5V/+12V
Power Cord	Power Adapter	Mobile Rack
		Mobile Rack
		Docking Case

USB Cable

USBdock

Mobile Rack Drive Case

Mobile Rack

Stand Set

USBdock Docking Kit Components

2-1 Installation

The following sections will guide you through the setup of the USBdock for operation.

•For Windows® 98: Please refer to the software installation manual to install the Windows® 98 driver.

•For use with the Mobile Rack: please refer to the Mobile Rack Installation manual for instructions for installing devices in the Mobile Rack drive case.

2-1.1 Install Driver Software (For Windows 98 only)

No driver is needed if you are running Windows 2000 or Mac OS. However, before connecting the USBdock to your system, Windows 98 users must install the driver provided on the software driver diskette. Please refer to the Software Installation Manual for instructions.

2-1.2 Install Stand Set on Mobile Rack

A 4-piece stand set is included to help heat dissipation and provide secure placement of the Mobile Rack. After mounting the device in the Mobile Rack, slide a stand pad onto each corner .

Stand Pad

(With Raised Nub on Bottom)

(x4)

Mobile Rack Stand Set Installed

USBdock Installation Manual