Host Idle Timeout
The ‘Host Idle Timeout’ setting monitors the connection between the host and the device. If the ‘Host Idle Timeout’ setting time is reached, the device will release the resources allocated to the port mapping. This pre- vents a stalled host from affecting the connected device. .
Note | Host Idle Timeout and Auto Reconnection |
| Function Detail |
Host Provide
Auto Reconnection Function
Ethernet
EDG Device Support
Host Idle Timeout Detect Function
Auto Reconnection
An auto reconnection function is provided by the host. Under certain cir- cumstances (such as: Ethernet connection failure, device power down or other device issues) the auto reconnection function will try to reconnect the assigned device.
28 |