Vicks EDG-4508+, EDG-4516+ user manual You should use the net save command to

The Port15 is type 422, idleto 30, idle

The Port16 is type 422, idleto 30, idle

[USAGE] port [nn all] type [232422485] [FUNCTION] sets the type of port(s) >port 3 type 485

>port 3

The Port03 is type 485, idleto 30, idle

[USAGE] port [nn all] idleto [0 - 65535] [FUNCTION] sets the idle timeout of port(s) >port 3 idelto 45

>port 3

The Port03 is type 485, idleto 45, idle

[USAGE] port [ nn all ] netcfg [d.d.d.d:d clear] [Function] set/clear the net configuration of port(s) >port 3 netcfg 172.18.2.215:6003

Set the IP of port 3 to 172.18.2.215, and TCP port number to 6003.

[USAGE] port [nn all] sercfg baud [noems] [5678] [11.52] [FUNCTION] set the line configuration of port(s)

[noems]: Parity setting

n:none

o:odd

e:even

m:mark

s:space

[5678]: Data bit setting

[11.52]: Stop bit setting

[USAGE] port save [FUNCTION]savestheconfigurationofporttosystem

Note	You should use the net save command to
	activate the change.

EDG-4508+/4516+ User Manual 82