Note :
If you choose to obtain an IP Address automatically, skip Step 11.
4.2.1.11.Optional. If you select Specify an IP Address, type the WAN IP Address, Subnet Mask, ISP Gateway Address and DNS in the boxes, seen in FIGURE
FIGURE 4-3: WAN IP Address - Specify an IP Address
4.2.1.12.If your ISP uses PPPoE (Point to Point Protocol over Ethernet), click Enable next to PPPoE Login; otherwise, click Disable. For detailed instructions on how to set the PPPoE Login parameters in FIGURE 3-4, see To Set PPPoE Login Parameters below.
Notes :
Using PPPoE, your ISP can authenticate your connection with a specific user name and password for security issues.
If you enable PPPoE, make sure to uninstall all existing applications on any computer in your network.
4.2.113. If you want to use UPNP (Universal Plug and Play) to plug devices like PCs, routers and others into a network and to automatically know about each other, click Enable next to UPNP; otherwise, click Disable.
4.2.1.14.When you have completed all the settings, click Apply, or click Cancel to undo your changes.
15