X-Micro Tech WLAN 11g user manual To Add a New Static Route

Page 69

5.11.1.To Add a New Static Route:

5.11.1.1.On the Advanced navigation bar, click Routing.

The Static Routing page appears, seen in FIGURE 5-15:

FIGURE 5-15: Static Routing Page 5.11.1.2. Enter the following static route information:

Paramet	Description
Paramet
er

Destinati	Specifies the network address of the remote
on LAN	LAN segment. For standard class "C" LANs,
IP	the network address is the first 3 fields of this
	Destination LAN IP, the 4th field can be left at
	0.

Subnet	Specifies the Subnet Mask used on the
Mask	remote LAN segment. For class "C" networks,
	the standard Network Mask is 255.255.255.0.

Gateway	Specifies the IP Address of the router on the
	local LAN segment to which this device is
	attached.
	Note that it is NOT the router on the remote
	LAN segment.

Hop	Specifies the number of routers that must be
	traversed to reach the remote LAN segment.
	Valid values are 1 to 16.

Interface	Specifies the interface through which the
	router goes to the next hop or a particular
	network. Available options are WAN, LAN and
	DMZ.

Image 69

Contents Wlan 11g Broadband Router XWL-11GRIX USA Federal Communications Commission FCC FCC Radiation Exposure StatementDisclaimer CopyrightContents Product Feature System RequirementsApplications Installation Instructions Installing Your RouterTo Configure Windows to Receive Dynamic IP Address Configuring Windows for IP NetworkingPage Collecting ISP Information Logon dialog box To Open the Web-based Administration ToolType admin in the User Name box Type the password in the box To Configure Setup Parameters SetupPage Page Click Enable next to PPPoE Login To Set PPPoE Login ParametersGlobal Address To Set up Global Address with DMZ DisabledGlobal Address Page with DMZ Enabled To Set up Global Address with DMZ EnabledTo Remove Global Addresses To Set the Wireless Radio Parameters WirelessMode DescriptionRTS Default Values for Radio Settings To Set Wireless Security Parameters10 Wireless Security Settings To Set WEP Keys Four newly generated WEP Keys will display in the Key 1 Key On the Wireless page, select Status To Review Wireless StatusTo Disable Wireless Tools To Change the Administrative Password for Your RouterType the new password in the Confirm Password box To Restore the Factory Default ConfigurationTo Upgrade the Firmware To Reset GatewayTftp -i gatewayIpaddress GET filename Tftp -i gatewayIpaddress PUT filenameUpgraded Status Paramet Description Status DetailDisconnected To Set Your Router as a Dhcp Server DhcpTo View the Active IP Table To Disable Dhcp on Your RouterTable, seen in Figure Optional. Click Refresh to obtain the most current dataLog To Set up Access Log on Your RouterTo View Session Event Log Click Session Event Log on the LogTo View Intrusion Event Log To View Block Event LogTo Disable Access Log on Your Router To View Wireless Event LogClick Wireless Event Log on the Log Click Intrusion Event Log on the Log25 Statistics StatisticsAP Radio Lists out the data on the Access Point’s radio Advanced Button on the Basic Window To Toggle between Basic Functions and Advanced FunctionsVirtual Servers To Set up a Client PC on the LAN as a Virtual ServerWell-know Ports Select a Public IP Address from the drop-down listTo Delete Virtual Servers on the LAN Filters To Set up a Port Filtering or Raw IP FilterPage Drop-down list Inbound Outbound and Both To Delete a Port Filtering Filter To Delete FiltersTo Block a Single IP Address IP/URL BlockDo either of the following IP Block page appears, seen in FigureTo Block a Specific Domain Name To Block a Range of IP AddressTo Delete a Specific or All URL Blocks To Delete a Specific or All IP BlocksTo Copy a Popular Application to a Specific Line Special AppsPopular Applications List To Configure a Special Application ManuallySpecial Apps Select a line corresponding to a specific ID To Delete Special Applications DMZ Host To Designate a PC in Your Network as a DMZ HostWhat do you want to do? To Delete DMZ Hosts To Clone the MAC Address MAC CloneOn the Advanced navigation bar, click MAC Clone Convenience, seen in FigureDynamic DNS To Configure a Dynamic DNS ServerTo Disable a Dynamic DNS Server Proxy DNS To Configure a Proxy DNS ServerTo Delete a Specific or All Proxy DNS Servers To Disable the Proxy DNS on Your RouterSnmp 14 Snmp Enter the following Agent information To Delete Snmp Community Names To Delete an Existing Snmp Trap ReceiverStatic Routing To Add a New Static Route To Delete a Static Route Glossary Ieee WAN