X-Micro Tech WLAN 11g To Set Wireless Security Parameters, Default Values for Radio Settings

Note :

You can see the default values of the above advanced wireless settings on the right of the page. If you don’t know how to change the settings, please leave as they are in Figure 4-8:

FIGURE 4-8: Default Values for Radio Settings

4.4.1.6.Optional. If you have enabled Distribution System, type the physical addresses of distributed client PCs in a wireless network in the Peer AP MAC Address 1-8 boxes, seen in FIGURE 4-9:

FIGURE 4-9: Peer AP MAC Addresses for Distribution Systems

4.4.1.7.When you have completed editing all the settings, click Apply, or click Cancel to undo your changes.

4.4.2.To Set Wireless Security Parameters:

4.4.2.1.Click Security Settings on the Wireless page.

The Security Settings appears, seen in FIGURE 4-10:

23