Z Microsystems SL manual Pbb, =mode~~~

APPENDIX

Argument

No arguments.

PBB

Description

PBB adjusts the blue balance of the main images RGB setting.

Argument

The allowable range is 0-255 base10. The factory default is 128.

PBG

Description

PBG adjusts the green balance of the main images RGB setting.

Argument

The allowable range is 0-255 base10. The factory default is 128.

PBR

Description

PBR adjusts the red balance of the main images RGB setting. On certain displays, a low brightness setting can cause the backlight to fade to black before reaching “0”.

Argument

The allowable range is 0-255 base10. The factory default is 128.

PCH

Description

PCH selects the channel that the controller should check for input. There are two chan- nels through which that input can be provided—channels A and B. The unit can also be placed in auto detect mode. The unit does not allow itself to be placed on a dead channel after it has acquired a signal. If the controller has a good signal coming in on channel A and the controller is told to listen to channel B and channel B has no signal the controller will switch back to channel A.

Argument

For Auto mode 66, channel A 88, channel B 99 all base10. Default is Auto mode.

Return

The channel being listened to is returned in the following syntax:

=<mode>~~~

where “mode” = {66,88,99}

48

Doc# 27-0032UM Rev A Issued 07/05