ZALMAN TNN 500AF Operating Environment, Precautionary Notes on Booting, Compatible Components

Page 21

1) Operating Environment

Recommended Room Temperature : 15~28

Operation in comfortable room temperature is recommended.

2) Precautionary Notes on Booting

When booting the computer, it may automatically power down after an alarm sound is generated to indicate that the rotation of the CPU fan is slow by a system monitoring program. If this happens, connect the fan on the stock CPU Cooler to the 3-pin connector for the CPU Cooler on your motherboard. Boot the system and set CPU Fan Detected to Disabled in the BIOS settings. Turn the system off, remove the CPU Cooler fan, and reboot.

NOTES)

1.Some motherboards do not boot if the rotation of the CPU fan is not detected. There might not be a "CPU Fan Detected setting in the BIOS setup, but updating the BIOS could solve this problem. For more information on updating the BIOS, please refer to your motherboard manufacturer s website.

2.When using an Intel motherboard, if you remove the motherboard from an existing system and attach it to the TNN 500AF, the system s Active Monitor may generate an alarm sound with a warning that there is no CPU fan. Remove Active Monitor from Add/Remove Programs applet in Control Panel and reinstall.

3)Compatible Components

A list of compatible components for building a TNN 500AF system is available at the following

website (www.zalman.co.kr/product/TNN500AF.html).

NOTE

Only use motherboards recommended by Zalman.[Certain motherboards have unusually

high power consumption and/or are not compatible with the Rear-mount Thermal Blocks

(ZM-RTB1). Refer to Page 22.]

TNN 500AF

Image 21
Contents Page For other language versions please visit our website English Edition TNN 500AF Disclaimer Stability Complete SilenceCPU Heatpipes VGA Card HeatpipesNorthbridge Heatpipe Ripple and noise waveforms at DC output Electricity ConservationEase of Use Shielding from EMI Electro-Magnetic InterferenceEMI Measurement Data Graphs Test Results TNN 500AF Intel P4 Prescott System TNN 500AF TNN 500AF Heatpipe VGA Cooler Parts One1 Bag Heatpipe CPU Cooler Parts One1 BagHeatpipe Northbridge Cooler Parts One1 Bag Rear-mount Thermal BlocksRemote Control Set Power Cord One1 Bag Latch KeyMotherboard Power Cable One1 Bag ODD/FDD Bolts Motherboard Bolts One1 BagTNN 500AF Compatible VGA Cards CPUs with Thermal Design Power ratings under 100WThermal Transfer Capacity Output Power Cable Precautionary Notes on Booting Operating EnvironmentCompatible Components Opening and Disassembling the TNN500AF Case Installing the CPU Clip Support and Motherboard For Intel Pentium 4 Socket 478 MotherboardsFor Intel Pentium 4 Socket 775 Motherboards For AMD AMD64 Motherboards Installing the Rear-mount Thermal BlocksTNN 500AF TNN 500AF Installing the Heatpipe Northbridge Cooler TNN 500AF Installing the Heatpipe CPU Cooler TNN 500AF Install the Heatpipe CPU Cooler as shown in the diagram Installing the Heatpipe VGA Cooler TNN 500AF TNN 500AF TNN 500AF Installing the ODD/FDD/HDD TNN 500AF TNN 500AF Installing PCI Cards Connecting the Power & Data Cables To Use the Remote Control Function Color codes To Sacrifice the Remote Control Function Three Available Dual USB Port on the Motherboard TNN 500AF Connecting Audio I/O, IEEE1394, and IEEE1394B Cables Use Casters Using the Remote Control Is prohibited