ZALMAN TNN 500AF manual Installing the Heatpipe VGA Cooler

Page 32

6) Installing the Heatpipe VGA Cooler

NOTE) If the VGA card interferes with certain components of the case, stop and refer to the following website (www.zalman.co.kr/product/TNN500AF.html), and replace the VGA card with one that is recommended.

As you install the VGA card, move the VGA Case Block Base vertically as needed to accommodate the VGA card.

Remove the Stock VGA Cooler on the VGA card and clean off the exposed contact surface completely.

NOTE) Be extremely careful when taking off the Stock VGA Cooler. Zalman is not responsible for any damages Due to user negligence during the Cooler’s removal.

TNN 500AF

Image 32

Contents Page For other language versions please visit our website English Edition TNN 500AF Disclaimer Complete Silence StabilityNorthbridge Heatpipe CPU HeatpipesVGA Card Heatpipes Electricity Conservation Ripple and noise waveforms at DC outputEMI Measurement Data Graphs Ease of UseShielding from EMI Electro-Magnetic Interference Test Results TNN 500AF Intel P4 Prescott System TNN 500AF TNN 500AF Heatpipe CPU Cooler Parts One1 Bag Heatpipe VGA Cooler Parts One1 BagHeatpipe Northbridge Cooler Parts One1 Bag Rear-mount Thermal BlocksPower Cord One1 Bag Latch Key Remote Control SetMotherboard Power Cable One1 Bag ODD/FDD Bolts Motherboard Bolts One1 BagTNN 500AF CPUs with Thermal Design Power ratings under 100W Compatible VGA CardsThermal Transfer Capacity Output Power Cable Compatible Components Precautionary Notes on BootingOperating Environment Opening and Disassembling the TNN500AF Case For Intel Pentium 4 Socket 775 Motherboards Installing the CPU Clip Support and MotherboardFor Intel Pentium 4 Socket 478 Motherboards Installing the Rear-mount Thermal Blocks For AMD AMD64 MotherboardsTNN 500AF TNN 500AF Installing the Heatpipe Northbridge Cooler TNN 500AF Installing the Heatpipe CPU Cooler TNN 500AF Install the Heatpipe CPU Cooler as shown in the diagram Installing the Heatpipe VGA Cooler TNN 500AF TNN 500AF TNN 500AF Installing the ODD/FDD/HDD TNN 500AF TNN 500AF Installing PCI Cards Connecting the Power & Data Cables To Use the Remote Control Function Color codes To Sacrifice the Remote Control Function Three Available Dual USB Port on the Motherboard TNN 500AF Connecting Audio I/O, IEEE1394, and IEEE1394B Cables Use Casters Using the Remote Control Is prohibited