Determine the points that correspond to the location of the FETs and Northbridge chipset on the back side of the motherboard.
Clean the surface of the point where the block will be attached.
Peel off the Film from the Thermal Pad on both ends of the block.
Firmly attach the blocks on the determined points.
NOTES : 1) To prevent short circuiting the motherboard, avoid soldered points, and any exposed wiring or circuitry when installing the
2)Thermal Pads lose adhesiveness after it has been used once. Try to attach it properly on the first attempt.
3)Do not touch the Thermal Pad with your hands.