ZALMAN Essential Guide to Proper Installation for TNN 500AF and Thermal Grease Application

Page 34

Apply a thin layer of thermal grease on the VGA chipset.

NOTE) Most VGA chipsets on the VGA card have a concave curvature towards the middle and need more thermal grease at the center.

Make sure the VGA Block Base is level and firmly installed onto the VGA chipset using the Paper Washers, the VGA springs, and the VGA Finger Bolts A(M2.5).

Apply thermal grease evenly onto the grooves on the VGA Case Block Base that come in contact with the VGA Heatpipes, and install the VGA card on the motherboard.

NOTE) The VGA Case Block Base already has thermal grease coated underneath, and should not be taken off under normal circumstances.

TNN 500AF

Image 34
Contents Page For other language versions please visit our website English Edition TNN 500AF Disclaimer Complete Silence StabilityVGA Card Heatpipes CPU HeatpipesNorthbridge Heatpipe Electricity Conservation Ripple and noise waveforms at DC outputShielding from EMI Electro-Magnetic Interference Ease of UseEMI Measurement Data Graphs Test Results TNN 500AF Intel P4 Prescott System TNN 500AF TNN 500AF Heatpipe Northbridge Cooler Parts One1 Bag Heatpipe CPU Cooler Parts One1 BagHeatpipe VGA Cooler Parts One1 Bag Rear-mount Thermal BlocksMotherboard Power Cable One1 Bag Power Cord One1 Bag Latch KeyRemote Control Set ODD/FDD Bolts Motherboard Bolts One1 BagTNN 500AF CPUs with Thermal Design Power ratings under 100W Compatible VGA CardsThermal Transfer Capacity Output Power Cable Operating Environment Precautionary Notes on BootingCompatible Components Opening and Disassembling the TNN500AF Case For Intel Pentium 4 Socket 478 Motherboards Installing the CPU Clip Support and MotherboardFor Intel Pentium 4 Socket 775 Motherboards Installing the Rear-mount Thermal Blocks For AMD AMD64 MotherboardsTNN 500AF TNN 500AF Installing the Heatpipe Northbridge Cooler TNN 500AF Installing the Heatpipe CPU Cooler TNN 500AF Install the Heatpipe CPU Cooler as shown in the diagram Installing the Heatpipe VGA Cooler TNN 500AF TNN 500AF TNN 500AF Installing the ODD/FDD/HDD TNN 500AF TNN 500AF Installing PCI Cards Connecting the Power & Data Cables To Use the Remote Control Function Color codes To Sacrifice the Remote Control Function Three Available Dual USB Port on the Motherboard TNN 500AF Connecting Audio I/O, IEEE1394, and IEEE1394B Cables Use Casters Using the Remote Control Is prohibited